11
Name:
enter the description.
ViP address:
enter the ViP address.
Image:
see
"Customising a directory image" on page 7
Name:
enter the description.
ViP address:
enter the ViP address.
Apartment:
use the drop-down menu to select whether you want to configure a call to the whole apartment, just
the master (main) monitor or a slave (secondary) monitor of your choice.
Emergency call:
If “Emergency” is enabled the contact will be marked with a red line and, when calling from
home, it will be possible to make a priority emergency call.
Image:
see
"Customising a directory image" on page 7
Name:
enter the description.
ViP address:
enter the ViP address.
Emergency call:
If “Emergency” is enabled the contact will be marked with a red line and, when calling from
home, it will be possible to make a priority emergency call.
Image:
see
"Customising a directory image" on page 7
ViP (PAL/IP cameras)
Name:
enter the description.
ViP address:
enter the ViP address.
Automatic camera:
select the desired camera from the drop-down menu.
Image:
see
"Customising a directory image" on page 7
RTSP (RTSP cameras)
Name:
enter the description.
RTSP address:
enter the Url address for the camera stream.
Username:
Account name for IP CAM access (as for camera configuration)
Password:
password for accessing the IP CAM (as per camera configuration)
Name:
enter the description.
ViP address:
enter the ViP address.
Relay:
enter the number of the output you want to control.
Image:
see
"Customising a directory image" on page 7
Name:
enter the description.
ViP address:
enter the ViP address.
Actuator/Expansion:
select the actuator or the expansion device number (from 1 to 10).
Actuator/Relay 1 Expansion:
enter the number of the relay (1 or 2) or the number of the expansion device (from 1
to 10) you want to control.
Image:
see
"Customising a directory image" on page 7
Deleting an entry in the Directory
DOOR ENTRY SYSTEM
Edit
Remove
Entrance
f
Press
and select
“Delete”
to delete the desired entry
