Comdial and FXT, Инструкция для обслуживающего персонала

Страница: 91 / 164

•
To set up a conference call on an E & M tie line,
1. MAKE first call.
2. SELECT
CONF
; call is placed on hold automatically.
3. SELECT next line AND MAKE next call.
4. SELECT
CONF
to establish conference.
5. Press
TRNS/CNF
button to add more parties for up to a seven party
conference (including yourself).
•
To continue conversation on remaining line after other
outside lines have dropped out of conference,
1. PRESS the line button of the remaining party.
•
To retrieve a line from hold and bring that party back into
the conference,
1. PRESS
TRNS/CNF
.
2. PRESS line button.
3. PRESS
TRNS/CNF
.
NOTE: If all the conference circuits are busy, you will not be able to add a
party to the conference.
•
To drop out of a conference call between you and two
outside lines (creating an unsupervised conference),
1. HANG UP (lines remain lighted and in use until one or both
outside parties disconnect).
•
To rejoin an unsupervised conference between two outside
lines,
1. PRESS
TAP
.
NOTE: Conference volume levels depend upon the quality of the external
lines.
Attendant Manual 81
GCA70-250 Other Features