CDX2000 / 13.56 MHz & 400 kHz Manual
© 2006 Comdel, Inc.
1
Before installing equipment, carefully read and familiarize yourself with the entire operations manual.
Observe and obey all WARNING and CAUTION notes provided.
1
Safety Information
Warning Label and Safety Marking Explanations:
The following symbols and terms may be found on an instrument or used in this manual.
The CE mark indicates compliance with all currently applicable directives and standards.
This label indicates a general warning or caution condition.
This symbol indicates the presence of high voltages in or around the unit.
This symbol indicates that the component or circuit is short circuit protected.
This symbol indicates the presence of RF energy in or around the unit.
This symbol indicates a protective earth ground connecting point.
This label indicates a presence
of high voltage in or around the
equipment, which may cause
sever injury or death. All
appropriate precautions should
be observed when installing,
operating or servicing this
equipment.
This label indicates the presence
of Radio Frequency energy in
and around the equipment,
which may cause burns or other
injuries. All appropriate
precautions should be followed
when installing, operating or
servicing this equipment.
