COMCOLOR FW 5000, Руководство пользователя

Страница: 142 / 186

Chapter 7 Using the Barcode Area Definition Software
ComColor FW Series User’s Guide
7-8
If you use the [Repetition] function when specifying the barcode areas, the areas are specified repeatedly for
subsequent pages based on the value specified for [Cycle] in the [Repetition] dialog box. This eliminates the
need to define the area on each and every page.
• When cycle is 0: The barcode areas are applied only on the pages that are configured in the barcode area
definition file.
• When cycle is 1: The barcode areas configured for the first page in the barcode area definition file are
repeated on each page until the last one.
• When cycle is 2: The barcode areas configured for the first 2 pages in the barcode area definition file are
repeated on every 2 pages until the last one.
• When cycle is 3: The barcode areas configured for the first 3 pages in the barcode area definition file are
repeated on every 3 pages until the last one.
The example below shows when barcode areas are defined for 3 pages.
You can select a registered barcode area definition file from the [Barcode Area Definition] pull-down menu in
the [Image] tab on the printer driver screen.
Select a suitable barcode area definition file when printing a barcode original. (p. 3-22 "Barcode Area
Definition")
Repetition Function
• You can specify from 1 to 999 pages for [Cycle].
• The pages after the ones set in the repetition process do not appear in the thumbnails.
Printing Barcode Originals
p.13 p.12 p.11 p.10 p.9 p.8 p.7 p.6 p.5 p.4 p.3 p.2 p.1
p.13 p.12 p.11 p.10 p.9 p.8 p.7 p.6 p.5 p.4 p.3 p.2 p.1
p.13 p.12 p.11 p.10 p.9 p.8 p.7 p.6 p.5 p.4 p.3 p.2 p.1
Original data
Barcode area
definition
Cycle: 0
Cycle: 3
The pages that you
configure in a barcode
area definition file
Barcode processing is not configured for pages 4 to 13.
The pages that you
configure in a barcode
area definition file
Repeated pages Repeated pages Repeated pages