6
This Chapter provides information on how to install and configure the
xCam2 .
System Requirements
•
To use the Wireless interface on the wireless model, other Wireless devices must be
compliant with the IEEE802.11abgnac specifications. All Wireless stations must use
compatible settings.
Mode: Infrastructure
SSID: ANY
Wireless Security: Disabled
Domain: USA
Channel No.: Auto
Installation
You must complete the following installation procedure when using the xCam2 for the first
time.
Step 1 - Adding an xCam2 to your network
Make sure the Router and the Touch Panel are both powered on and synchronized before
adding your xCam2 . This step is required when an xCam2 is used for the FIRST time. It only
needs to be done
ONCE
in order to configure the wireless settings for the xCam2 .
Note:
Skip this section if the xCam2 has been set up already.
On the Touch Panel, click on
setting
icon on the home page.
2.
Enter the
Η
Master
Η
code.
3. Enter the
"Technical code/ID"
, then click the
"Done"
button.
4. Select "Home Devices". Then choose "Cameras-> Add a Camera".
5. Click the
"Next"
button to check network.