5. The battery compartment contains a
diagram of the proper battery position with
a symbol indicating which way the positive
(+) end of the battery should be facing.
Insert four non-rechargeable AA batteries
into the battery slots in the battery pack,
position the positive (+) end of the batteries
as shown in the battery diagram.
6. Hold the battery pack over the interior lock
body with the arrows on the top facing the
door. Press and hold the LOCK button at
the top of the exterior lock face while
sliding the battery pack down into the lock
body.
When the battery pack is placed, the latch bolt
retracts halfway and then extends back into
place. Release the LOCK button after the latch
bolt extends back into place.
If lock tones are enabled, a loud beep sounds
after the latch bolt extends and two more
sound when the lock button is released.
7. Align the battery cover with the front of the
interior lock face and move it toward the
door until it covers the lock body.
8. Secure the battery cover to the interior lock
body by inserting the screws back into the
sides and bottom of the battery cover and
turning them clockwise to tighten them in
place.
9. When the batteries are inserted correctly,
the LED light above the turn bolt on the
interior lock face will flash.
Confirm that the low battery alert has resolved and the equipment appears on your list of connected devices.
Need Help?
Find these instructions online at
https://www.xfinity.com/support/home-security/installing-batteries-kwikset-914-lock/
. Get more troubleshooting support
https://www.xfinity.com/support/gettingstarted/troubleshooting/
or contact a customer service expert at 1-800-
XFINITY.
Help Protect Our Environment:
Please properly recycle your discarded batteries. For your convenience, batteries are
accepted for recycling at various locations. Check
or call 1-800-8-Battery (1-800-8-228-8379) to
find a recycling location near you.