Connect the power cable to the
adaptor box and plug in to an
electrical outlet.
THIS ADAPTOR BOX DOES NOT
HAVE AN ON/OFF BUTTON.
PLUGGING IT IN (AND OUT) IS
HOW YOU WILL TURN THE
SYSTEM ON AND OFF.
Power Adaptor
Camera
USB
IR
Audio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
Back of Adaptor Box
Network
Messages
Power
SD Card
Adaptor Box
Camera with Clip
Power Cable
HDMI Cable (2x)
Note: You may not need both HDMI
cables if you already have one in use.
Power Adaptor
USB Extension Cable
for Camera
Follow the steps to set up Skype on XFINITY.
Open Me First
Camera
USB
IR
Audio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
Network
Messages
Power
SD Card
WPS
Use for wireless setup with
WPS capable routers.
(Currently not available)
SD Slot
Use for viewing media
Message Indicator
Glowing LED indicates
new messages.
Network Indicator
Glowing LED
indicates connection
to home network.
Power
Glowing LED indicates
adaptor is on.
HDMI
Cable In
HDMI
TV Out
USB/IR
Power
Ethernet
Camera
Audio
Back
Front
Top
WPS
Keep for future reference, but if you decide to toss, please recycle.
Getting Started Guide v.3.1.3
Printed in China
Reset
Insert a thin object to hold the internal Reset button for
desired result:
Normal Reset
Hold for 2-5 seconds to reboot and keep personal settings.
Factory Reset
Hold for at least 15 seconds to delete ALL personal settings
and restore to default factory settings.
Support Information
Visit www.comcast.com/skype for
online support.
Call our customer care staff at
877-704-7713
for assistance.
TV
A/V Receiver
OFF
Turn off TV, XFINITY
set-top box and A/V
receiver (if using).
XFINITY Set-Top Box
Messages
Power
3
POWER OFF
On/Off Indicator
Glowing LED
indicates
camera is on.
Lens with Shutter
Shutter closes when
camera is off.
Clip
Adjust for
placement.
Microphones
Microphones
During setup, you’ll connect to the Internet and create
a Skype on XFINITY profile. Save time and have the
following handy before you begin:
+
Back of Adaptor Box
Modem
Ethernet
cable not
provided
Camera
USB
IR
Audio
Ethernet
Reset
Power
HDMI
HDMI
Cable In
HDMI
TV Out
HDMI
5
CONNECT TO INTERNET
Ethernet: Plug a CAT-6 Ethernet
cable (not provided) into the
Ethernet port on the adaptor box
then plug the other end into your
modem/router.
OR
Wireless: Skip this step and
follow the instructions during
TV activation.
- Comcast ID
- Comcast Password
Your Comcast ID is the username
for your @comcast.net email address.
Visit https://customer.comcast.com
if you don’t know your Comcast ID.
Comcast Account
- Skype Name
- Skype Password
Don’t have a Skype account?
Create one during activation.
Skype Account
For wireless connections
If using a wireless network, you’ll need your
Network Name (SSID)
and
Password (Key
)
.
For your Skype on XFINITY profile =
Remote
2
GATHER INFORMATION
1
CHECK THE BOX
ADAPTOR BOX DETAILS
CAMERA DETAILS
4
PLUG IN POWER CABLE
