Comcast 781W, Руководство пользователя, Страница: 17 / 57

17
781W
Parameter Illustration
Connection Name
The list of WAN connection name that has been created.
If you want to create a new WAN connection, please select
“Create WAN Connection” and input other Parameter at the same
time and then click “Create” button. If you want to edit WAN
connection, please select the wan connect name you want to edit
and change some Parameter and then click “Modify” button. If
you want to delete one connection, please select the wan
connection you want to delete and then click “Delete” button.
New Connection Name Name of new connection that you want to create.
Mode
Bridge/Route. The device works on route mode with this WAN
connection.
IP Protocol Mode IPv4/IPv6
WAN ip mode DHCP/Static/PPPoE
Enable NAT
Checked indicates NAT function is enabled. Unchecked indicates
NAT function is disabled.
VLAN
Enable VLAN
Checked indicates the packets are transmitted by the PON port
take VLAN tag. Unchecked indicates the packets are transmitted
by the PON port don’t take VLAN tag.
VLAN ID
Input the VLAN ID you want to set. Range is 0~4094. Input 0
means don’t use any VLAN.
802.1P Select VLAN priority you want to set. Range is 0~7.
MTU
Max transfer unit. Default Value (in Byte):
1500(static/DHCP) or 1492(PPPoE).
PPP
Username PPPOE account.
Password PPPOE password.
IP Type/PPP TransType
Method of WAN connection Obtains IP address. If link type is
PPP, PPP TransType will be PPPOE; if link type is IP, IP Type
will be static or DHCP.
Service Mode Service mode indicates what the wan connection is used for.