8
www.combisteel.com
REPLACE HEPA FILTER AND CLEAN PRE-FILTER
WARNING: Disconnect power at the breaker or unplug the hand dryer before any servicing & maintenance !
1. Press back then down to open pre air filter.
2. Take the HEPA filter out. When replacing a new HEPA, be sure that the HEPA’s rubber ring is at the top.
3. Clean the dust lint on the pre-filter.
REPLACE WATER TRAY AND UNINSTALL HAND DRYER FROM WALL
1. If there is a water overflow pipe connected, please move it.
2. Pull front to take the water tray out. Then loosen two anti-theft screws <Only HEPA is moved when re-fixing
these two screws>.
3. First pull up then pull front to take hand dryer from wall. Take care, it weighs 11KG.
4. After reinstallation, before replacing water tray, there is an option to run the dryer heater On or OFF and air
speed High or Low. The switch is clearly marked.
