background image

 

www.combisteel.com 

NOTE: 
This User Manual has been issued for several models. 
Some features mentioned in this manual may not be available in your product. 
These features have been indicated with *. 
“READ THE INSTRUCTIONS BEFORE ASSEMBLING OR USING THIS ICE MAKER”. 
This product has been produced in environment-friendly modern facilities without harming the environment. 
 

Safety warnings 

1.

 

Always plug the power cord of your product to a grounded socket. 

2.

 

Your ice maker is designed to operate at 230 V 50 Hz. Using the product at a different voltage may cause the 
product to become dysfunctional or cause fire. 

3.

 

Do not place your ice maker near the influence areas of heat sources. 

4.

 

For the assembly, choose a humidity-free place where air circulation is not hindered. 

5.

 

After placing your ice maker to its place, wait at least 2 hours without moving it before you start using. 

6.

 

Make sure you cleaned the inside surface of your product before first use. 

7.

 

Do not use multi sockets or extension cords to start your product. 

8.

 

Protect power cord against hot surfaces. 

9.

 

Ice  Makers  should  not  be used  by  inexperienced  individuals  as  well  as  those  whose  physical,  hearing  or 
mental abilities are not sufficient or who do not have knowledge, unless they are under supervision or are 
trained. 

10.

 

Children must be kept under supervision in order to prevent them playing with ice makers. 

11.

 

This Ice Maker can be used by children at and over age 8, besides those having restricted physical, hearing 
or hearing or mental abilities, as well as those having lack of experience and knowledge, provided only they 
are to be informed about the potential hazards and about the safe use of the device. 

12.

 

The  cleaning  and  maintenance  of  the  device  should  not  be  made  by  children  unless  they  are  under 
supervision. 

13.

 

Children should not play with ice maker. 

 
NOTE 

This  product  bears  (AEEE/WEEE)  classification  symbols  indicating  waste  electric  and  electronic 
equipments.

 

Accordingly, the user must  comply with the European directive 2002/96/EC on recycling for the 
purpose of minimizing the impact of the relevant product on the environment.

 

Caution!  This  contains  information  on  the  prevention  of  the  serious  hazards  which  might  cause      
product become dysfunctional, injury and loss of life and property, during the use of the product. 

Warning against electric shock.

 

This defines the explanatory and facilitating information during use

 

 

 

 

Содержание 7489.4 Series












Отзывы: