CombiSteel 7476.0136, Руководство пользователя

Страница: 6 / 19

6
The manufacturer is not responsible for damages or accidents arising from the misuse or disregard of electrical
laws relevant to the country where the cooler is used.
4. MAINTENANCE

Before cleaning the cooler always remember to unplug it.

Unplug the cooler at the electrical outlet; never pull the service cord.

Do not use sharp objects for cleaning.

Clean the inside cabinet of cooler with a clean damp cloth or with neutral soap. Avoid damage by never
using abrasive or flammable cleaning products.

Clean the condenser at least once a month with a vacuum cleaner or a brush to eliminate the dust
accumulation.

Do not wash the cooler with direct, or high pressure water jets.
When the relative humidity is more than 55%, there will be condensation on the door glass, it's normal and
unavoidable.
5. TROUBLE SHOOTING
Often problems that occur during normal operation can be resolved without the assistance of a specialized
technician, verify the following:
a) The appliance does not operate.
-Check that the plug is correctly into the electrical outlet.
-Verify that there is voltage at the electrical outlet
b) The product is too warm.
-Check the setting of the thermostat. (See Testing Section)
-Check the closing of the door, and ensure door gasket seals.
-Check that the interior fan is operating, and not blocked.
-Check and clean the condenser
c) The appliance is excessively noisy.
-Verify the equipment is level.
-Ensure that the equipment is not touching other equipment that could cause vibration.
Prepare to answer the following:
-The type of problem: (electrical, mechanical)
-The model, code and serial number of the cooler can be found on the manufacturer label attached to the interior
wall of the cooler.