4
Important safety instructions
1.
To obtain full use of the counter top, we recommend reading this instruction manual.
2.
It is the user’s responsibility to operate the appliance in accordance with the instructions given.
3.
Contact your dealer immediately in case of any malfunctions.
4.
Place the counter top in a dry and ventilated place.
5.
Keep the counter top away from strongly heat-emitting sources and do not expose it to direct sunlight.
6.
Always keep in mind that all electrical devices are sources of potential danger.
7.
Do not store inflammable material such as thinner, gasoline etc. in the counter top.
8.
We declare that no asbestos nor any CFC are used in the construction.
9.
The oil in the compressor does not contain PCB.
Unpacking and installation
Remove the wooden pallet and the packing. External surfaces are supplied with a protection foil, which must be
removed before installation
Electrical connection
The counter top operates on 230 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be observed. The counter top plug
and wall socket should then give correct earthing. If in doubt, contact your local supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-Amp or 3-pin 15Amp plug. If a
B.S. 1363 (13-Amp) fused plug is used, it should be fitted with a 13-Amp fuse.
The wires in this mains lead are coloured in accordance with the following code: Green/Yellow: Earth, Blue:
Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.
Start-up of the counter top
Before use, we recommend that the counter top is cleaned, see the section on maintenance and cleaning.
Important !
If the counter top has been vertically placed during transport, please wait 2 hours before starting up the counter
top. Connect the counter top to a socket and turn on the switch on the control panel, see fig. 1.9.
