8
Assembly of freezer
•
The protective film should be removed (if it exists)
•
By using adjustable feet, make the freezer stable. Avoid gaps, prevent vibration.
•
Compressor group air inlet must not be prevented. This is the most important issue. Allocate your product
that it will be parallel to the ground, no aim is required. Adjustable feet and rollers must touch the base. The
distance between compressor group and wall is important. More distance, provides increasing performance.
For that reason, at least 15 cm gap is required.
•
After transport of the freezer, before operating it, you should wait for three hours.
•
The first running must be done when the freezer is empty. Loading can be done after this period.
•
Connection of the freezer must be checked by experienced electrician. The fuse height must be 170 cm.
•
For fault current, electric connection must be supported with 30 mA fuse.
•
The freezer must be also provided with the nearest ground.
