Page 6
SINGLE USER MODE
MULTIPLE USER MODE (LOCKER MODE / ONE TIME USE MODE)
SERVICE PASSWORD
MASTER PASSWORD
PROGRAMMING THE MINIK10
TECHNICAL SPECIFICATIONS:
LIGHT AND AUDIO NOTIFICATION:
MAINTENANCE:
- Clean front of lock with a mild damp cloth with detergent if needed.
- Do not use any hard or scratching cleanser.
- Do not clean with chemical materials that melt plastic (e.g. thinner, acetone, etc.)
-Be careful not to spill water on lock.
GENERAL WARNINGS:
- Read manual before using lock.
- Set and test user and master passwords prior to installing the lock
- Change all default passwords with your own passwords.
- Common sense, but we must say it... Do not keep the passwords in the cabinet where
the lock is being installed!
- It is not possible to open lock if installed and you forget the user and master password.
- Lock gives a warning beep when passwords are old or have not been entered excessively.
- Not possible for front side of lock to be opened by breaking or trying to force open lock.
- Use CR2450 3.0V Lithium batteries.
- Remember that battery consumption is high when programs 2, 3, and 7 are active.
PROGRAMMING OPTION DEFINITIONS:
OTHER PRODUCTS IN THE COMBI-CAM FAMILY:
CHANGING THE BATTERY:
Installation instructions??
- Cam placement,
- Stop Cam
- Template for screw hole?
- Template for routing out?
- Optional Cams available?
- What about metal semiflush mount? Is there a bracket available?
