ComAp InteliMains NT IM-NT, Справочное руководство

Страница: 185 / 437

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf,
©ComAp – April 2015
185
transferred to gen-sets. After pressing MCB button
MCB is opened and MGCB stays closed, gen-sets are
running in Island operation.

Test on load - MGCB is closed, gen-sets synchronized
to the bus, load transferred to gen-sets and MCB
opened. Return of the load to the Mains is adjusted via
setpoint
ReturnTo mains .
11.2.2.18 Setpoint: ContrInitMode
Group Basic settings
Range [units] PREVIOUS, OFF, MAN, AUT, [-]
Related FW standard v3.2.0
Description This setpoint adjusts which mode will be activated when the controllers is
powered on.
11.2.2.19 Setpoint: Local buttons
Group Basic settings
Range [units] PANEL, EXTBUTTONS, BOTH [-]
Related FW standard v3.1.0
Description The setpoint selects which set of control buttons is currently active. Its function
depends on which type of controller is used. Please refer to the section which
suits your controller/display version.

First section deals with the case of IGS-NT with built-in monochrome
display.

Second section deals with the case of IGS-NT-BB with IV5 display.

Third section deals with the case of IGS-NT-BB with IV8.
N
OTE
:
If you have IGS-NT (built-in display) and you use additional IV display all the
sections may be relevant (depending on the type of additional displays).
IGS-NT (built-in monochrome display)
PANEL The built-in buttons on the controller front panel (IG-NT) or
terminal #1 (IS-NT) are enabled, the binary inputs for
external buttons are disabled.
EXTBUTTONS
The built-in buttons are disabled and the binary inputs for