ID-Mobile Global Guide
241
Analog ramp
Symbol
Inputs
Input
Type
Range[DIM]
Function
Input
A
Any
Input value to be ramped
Up
A
Same as input
Maximal rising rate of the
output per one second
Down
A
Same as input
Maximal lowering rate of
the output per one second
Outputs
Output
Type
Range[DIM]
Function
Output
A
Same as input
Ramped value
Description
This block limits the maximal rate of change at the output. The maximal rates up and down
are adjustable separately and ramping down and up can be enabled/disabled separately.
1. Adjust the maximal rising rate of the output per one second. If you want the delay to be
a constant, write the constant into the box. Otherwise connect the input to any other
analog object.
2. Adjust the maximal lowering rate of the output per one second. If you want the delay to
be a constant, write the constant into the box. Otherwise connect the input to any
other analog object.
3. Tick the checkbox to activate the rising rate limitation.
4. Tick the checkbox to activate the lowering rate limitation.
5. Rename the output.
Note:
The inputs are assigned to their sources in the sheet by
dragging a wire
from the
input to the source.
