9
MACHINE PREPARATION
4.
CONNECTING THE MACHINE
For the connection, you must:
1.
connect the extension lead to the plug on the handlebars
2.
block the extension lead to the cable-holder handle in front of the handlebars
3.
connect the extension lead to the wall socket
ATTENTION
: before connecting the extension lead to the socket,
check the switches are in the off (“0”) position!
5.
FIXING THE HANDLEBARS
For packaging purposes the handlebars are supplied folded; they must now be put in the
working position. Proceed as follows:
1.
raise the handlebars, pulling the lever (indicated by the arrow) upwards
2.
put the machine in the working position
6.
DETERGENT SOLUTION
Fill the solution tank with clean water at a temperature no greater than 50 C and add liquid
detergent in the proper concentration, following the instructions of the manufacturer. The
formation of excess foam could damage the suction motor, so use only the minimum
amount of detergent necessary.
ATTENTION:
always use low foam detergent. To avoid the
production of foam, before starting to clean, put a minimum
quantity of antifoam liquid into the recovery tank. Do not use pure
acids
.