11
WORK
1.
PREPARING TO WORK
Before fitting the tanks, it is necessary to carry out certain operations:
1.
check the switches are in the off (“0”) position
2.
connect the cable to the socket
3.
carry out the operations to prepare the machine
4.
lower the squeegee command lever in order to start working
5.
press the main switch (1) and check the green indicator light comes on
6.
press the suction switch (2) and check the green indicator light comes on
7.
press the solenoid valve switch (3) and check the green indicator light comes on
At this point, the machine can work efficiently until the detergent solution runs out;
use the operating lever that activates the brushes (4)
2.
OVERFLOW DEVICE
The machine is fitted with a float filter which intervenes when the recovery tank is full,
causing the suction tube to close.
In this case, it is necessary to switch off the machine and empty the recovery tank.
ATTENTION:
this operation must be carried out using gloves to
protect against contact with dangerous solutions.