ADJUSTMENTS
AND
INSPECTIONS
SIMPLA 50 BS
Doc. 10001246
Emitted 07/2006
Rev. 00
Pag.
4 di 4
Brake adjustment
1.
Adjustment hand brake: Verify if the
lever
does not snap more
than 3-4 times. If necessary restore the right execution register
the nut on the brake cable.
2.
Adjustment of the brake disk. Verify the uniform brake effect. Try
to turn the machine with insert brake to the left and to the right:
Check if the wheels remain blocked in the same way.
Adjustment Squeegee
1.
Adjustment of the inclination
controller
back rubber in working
conditions, in order to obtain a uniform inclination.
2.
Adjust the wheel height with the corresponding
hand wheel
.
Check, if the rubber has an inclination about 30°-45° and is not
pressed on the floor or in a lifted position.
3.
Adjust the length of the lifting cable with the corresponding
controller
, until the back rubber is lifted about 4-5 cm from the
floor. The squeegee should not have contact with the tank outlet.
Afterwards fix the nut.
About 45°
Back rubber
Front rubber
4.
Check, if the
Spring ring
is completely closed.
Final inspection
Check all functions: scrubbing, suction, forward- and reverse gear and emergency brake.