26
DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
1. CLEANING THE RECOVERY TANK
1.
Disconnect the tube (1) from its seat, unscrew the drainage cap and empty the recovery tank.
ATTENTION: Before performing any maintenance, remove the keys from the
panel and disconnect the battery connector of the machine.
WARNING: this operation must be carried out wearing gloves to protect
against contact with dangerous solutions.
2.
Engage the parking brake.
3.
Lift the brush head body and the squeegee body off the ground.
4.
Raise the cap (2) until the hook is secured to the prop (3) of the recovery tank.
5.
Clean and rinse the recovery tank and the suction pipe (connecting pipe between the squeegee and
the tank).
6.
Reposition the cap on the drainage tube and lower the suction cap. To lock the prop (3) just slightly
raise the cap, release the prop (3) and lower the cap up to close it.
2. CLEANING THE SUCTION FILTER
1.
Raise the cover.
2.
Remove the suction filter protection (1) by rotating it clockwise
3.
Pull the filter (2) to unthread it
4.
Use a jet of water to clean the walls and brush head of the filter. Carry out the cleaning operations
carefully
5.
reassemble all the elements
WARNING: Before carrying out any type of maintenance, disconnect the
machine's battery connector.
WARNING: this operation must be carried out by using gloves in order to
protect against contact with dangerous solutions
3. CLEANING THE SUCTION TUBE FILTER
1.
Raise the suction cover and block it as indicated in the previous paragraph
2.
Rotate the inner filter (1) and remove it
3.
Carry out the cleaning operations carefully
4.
Reassemble all the elements
ATTENTION: These operations must be carried out using gloves to protect
against contact with dangerous solutions
ATTENTION: Before performing any maintenance, remove the keys from the
panel and disconnect the battery connector of the machine.
2
3
1
1
1
2