55
EXTRAORDINARY MAINTENANCE
3.
Turn the cover rotation catch (2)
4.
Using the handle (3) rotate the rear cover as far as it will go
WARNING
: Check the level of the combustion engine's coolant with the engine off,
with the engine at ambient temperature, with the machine parked on a flat surface.
5.
Unscrew the cap (4) of the coolant fluid container of the combustion engine
6.
Put the coolant into the container, so that it is between the minimum and maximum level on the label
WARNING
: It is recommended that the above-mentioned operations be carried out
by personnel trained by the service centre.
WARNING
: It is recommended that just fluid be used.
58.
MAINTENANCE OF THE BRAKING SYSTEM FLUID
Proceed as follows in order to carry out maintenance of the brake fluid:
1.
Engage the parking brake, pressing the pedal (1)
2.
Check the main machine switch is in the “OFF-0” position. If this is not the case, turn the key by a
quarter rotation to the left.
3.
Turn the cover rotation catch (2)
4.
Using the handle (3) rotate the rear cover as far as it will go
WARNING
: Carry out this procedure only when the engine is off, with the engine at
ambient temperature, and with the machine parked on flat ground.
5.
Unscrew the cap (4) of the machine's brake fluid container
6.
Pour the fluid into the container, up to a point that it does not spill out when the cap is put back on, also
take care not to create air bubbles that could compromise the efficiency of the machine's brakes
WARNING
: Only use "DOT 4" brake fluid that conforms to the SAFETY STANDARD
116 DOT4 and SAE 3/1703D
WARNING
: It is recommended that the above-mentioned operations be carried out
by personnel trained by the service centre.
2
3
4
1
2
3
4