27
MACHINE PREPARATION
28. SERVICE
BRAKE
– PARKING BRAKE
The machine has a mechanical braking system, in normal conditions just press the pedal (1) down.
In case of lack of oil in the braking system, the red warning light (2) on the instrument panel will come on;
check the level in the brake oil tank located behind the vehicle nose.
To engage the parking brake press the pedal (3) down, the red warning light (4) on the instrument panel
will come on. To disengage the parking brake, use the lever (5).
29. WORKING FORWARD SPEED
To move the machine in the work direction, turn the key to “ON - I” then press the pedal (1) down, adjusting
the speed by altering the degree of pressure on the pedal. To go in reverse, press the pedal (2) down.
WARNING!
The reverse speed is lower than the forward speed to comply with
current health and safety standards.
30. SIDE BRUSH ASSEMBLY
To assemble the side brush, proceed as follows:
1.
Check that the side brush is raised off the ground, if not use the lever (1) on the control panel (for the
left side brush), while using the lever (2) on the control panel (for the right side brush)
2.
Engage the parking brake located on the left side of the machine
1
4
2
3
5
2
1
2
1