24
DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
29.
CLEANING THE CENTRAL BRUSH
Proceed as follows in order to clean the central brush:
1.
Engage the parking brake.
2.
Make sure that the main switch is in the "0/OFF" position, if not turn the key a quarter turn to the left.
3.
Lift the central brush by turning the left lever (1) clockwise.
4.
Lift the side brush if lowered, by rotating the right lever (2) clockwise.
5.
Loosen the wing nuts (3) fixing the right side casing.
6.
Remove the right side casing (4) from the machine.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
7.
Loosen the wing nuts (5) fixing the idle support (6) of the central brush.
8.
Remove the idle support (6) of the central brush from the machine.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
9.
Loosen the wing nuts (7) fixing the right side splash guard pre-assembly.
10.
Remove the right side splash guard pre-assembly (8) from the machine.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
11.
Remove the central brush (9) from the machine.
12.
Clean it under running water and remove any impurities.
ATTENTION:
this operation must be carried out using gloves to protect against
contact with dangerous substances.
2
1
3
4
6
5
7
8
9