COMAC CS 60 II Скачать руководство пользователя страница 8

 

 

 
9

 

GENERAL SAFETY REGULATIONS 

 

The rules below must be followed carefully in order to avoid injury to the operator and damage to the 
machine. 

  Read the labels carefully on the machine. Do not cover them for any reason and replace them immediately if damaged. 

  The machine must only be used by authorized staff who have been instructed in its use.  

  During the operation of the machine, pay attention to other people around you, especially children. 

  Do not place any liquid containers on the machine. 

  The storage temperature should be between –25

°

C and +55

°

C. 

  The perfect operative temperature must be between 0

°

C and 40

°

C. 

  The humidity should be between 30 and 95%. 

  Do not use the machine in explosive atmospheres. 

  Do not use the machine as a means of transport.  

  Do not use acid solutions which could damage the machine and/or people.  

  In order to prevent floor damage, do not leave brushes running when machine is standing still. 

  Do not vacuum inflammable and/or explosive liquids or substances. 

  In case of fire, use a powder extinguisher. Do not use water. 

  Do not strike shelving or scaffoldings, where there is danger of falling objects. 

  Adapt the speed of operation to the floor conditions.  

  Do not exceed the declared hill climbing capacity, otherwise the machine could become unstable.  

  When the machine is in parking position, remove the key and apply the parking brake. 

  If the machine does not work properly, check by conducting simple maintenance procedures. Otherwise it is better to ask for 

technical service COMAC S.p.A.. 

  Where parts are required, ask for ORIGINAL spare parts from your agent and/or from an authorized COMAC dealer.  

  Prior to any maintenance operation remove the power supply from the machine. 

  Do not remove any parts which require the use of tools to be removed.  

  Do not wash the machine with direct water jets or with high water pressure nor with corrosive material. 

  After every 200 working hours have a machine checked by a COMAC S.p.A. service department. 

  The machine should not be abandoned, because of the presence of toxic-harmful materials (batteries, oil, etc.). This 

disposal must be subject to the rules which provide for its scrapping in appropriate centres. 

  When scrapping the batteries refer to their proper “Use and Maintenance” book. 

 

 

Содержание CS 60 II

















Отзывы: