COMAC CA Oil 2L, Руководство по эксплуатации и обслуживанию, Страница: 10 / 28

10
ENGLISH
Before using the appliance for the first
time, read and comply with these safety
warnings. Keep these safety warnings
for consultation in the future or to hand
them over to successive owners.
• Before commissioning, read the appliance's
user manual.
• The warning plates on the appliance provide
important instructions for its safe use.
• Always comply with both the directions on
the instructions, as well as current safety
standards.
• Keep the packing film out of the reach of
children. Risk of asphyxiation!
DANGER: Indicates an imminent danger
that could cause serious injury or death.
WARNING: Indicates a probable
dangerous situation that could cause
serious injury or death.
CAUTION: Indicates a probable
dangerous situation that could cause
minor injuries.
ATTENTION: Indicates a probable
dangerous situation that could damage
objects.
SAFETY WARNINGS FOR WET VACUUM
CLEANER
DANGER LEVELS
DANGER:
• To reduce the risk of fire, electric shocks or injury, please read and follow the safety instructions and
warning indications before using. This vacuum cleaner has been designed to be safe when it is used
for cleaning in the specified manner. If damage to electrical or mechanical components is found, the
vacuum cleaner and/or the accessory must be repaired at the relative authorised service centre or
else at the manufacturer before use, in order to prevent further damage to the appliance or physical
injury to the user.
• Before connecting the appliance to the electricity socket, make sure the electrical information on the
plate corresponds to that of the mains supply. The appliance must only be powered with alternating
current and voltage equal to that shown on the serial number plate .
• The power supply cable outlet must have an earth connection in compliance with the regulatory
standards.
• Before using, check for any damage on the connection cable and on the power plug. If the cable is
damaged, immediately contact a specialist technician for restoring normal operations.
• Connect the appliance only to an electrical connection installed by an electrical installer in conformity
with IEC 60364-1.
• Never touch the power plug with wet hands.
• Make sure that the cable to the mains or the extension cable have not been damaged by having been
walked on, crushed, pulled or the like. Protect the cable from heat and from contact with oils or sharp
edges.
• Regularly check that the cable connecting to the mains is not damaged, for example with signs of
ageing or cracks. If there is damage, the cable must be replaced by a specialist COMAC technician or
else by a technician with similar qualifications before using the appliance again.
• Protection against splashes of water and the mechanical strength need to be ensured also after any
replacement of the joints of the power cable or the extension cable.
CONNECTION TO THE ELECTRICITY GRID
ENGLISH
The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time
to elements, details, or accessory supply, as considered necessary for reasons of improvement or manufacturing/commercial requirements. The
reproduction, even partial, of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images are shown as reference only and are not
binding as to the actual design and/or equipment.