COMAC CA 1.30, Руководство по эксплуатации, Страница: 11 / 32

ATTENTION
Read carefully the instructions in this booklet and keep it handy for further reference. Failure to observe
these warnings can affect the safety of the vacuum. The packaging components (plastic bags, staples,
etc.) can be dangerous and must therefore be kept out of the reach of children and handicapped persons,
etc. After opening the package, check to make sure that the vacuum is intact and complete. In case of any
irregularity or missing pieces, as in the case of all future and eventual repairs, contact an authorized
service centre which can guarantee the use of original parts. Before connecting the vacuum to electricity,
make sure that the electrical specifications on the technical data label of the unit correspond to those of
your electrical outlet. This unit must be used only for the specific purposes for which it has been
manufactured, namely: cleaning of inert surfaces, vacuuming of solids which are non-flammable and non-
explosive. Any other use must be considered improper and dangerous. Avoid bringing the attachments in
close distance of delicate organs such as ears, eyes, mouth, etc. This electrical appliance does not have to
be used by persons with reduced psychic, sensory or mental abilities, or by persons without experience
and without acquaintance, unless they are controlled or instructed to the use of the appliance by
responsible persons of their safety. Children must be supervised in order to make sure that they do not
play with the appliance. The vacuum must not remain connected to electricity when not in use. Before
carrying out any cleaning or maintenance work on the vacuum, make sure that the vacuum is not
connected to electricity. Do not immerse the vacuum in water. Do not use any solvents. The manufacturer
cannot be held responsible for any damage to persons, animals or objects, from the improper or
unreasonable use of this vacuum, or from failure to observe the warnings in this booklet or from the failure
to carry out the instructions therein. Do not use the vacuum with the power cord twisted on the cover head.
This equipment can be used in several communities, as an example in lodges, schools, hospitals,
factories, stores, offices and in residences.
TO USE THE DRY VACUUM CLEANER (not to vacuum liquids)
Make sure that the plug is disconnected from the source of electricity (figure 1). Unhook the tank latches
(figure 2), remove the head and ensure that the star filter is properly installed (figure 3). Put the head in its
original position again and secure it onto the tank with the latches (figure 4). lnsert the flexible hose in the
tank entry (figure 5) and assemble the two steel wands onto the flexible hose (figure 6). Connect the plug
to the source of electricity (figure 7), push the switches to the ON position (figure 8) and start cleaning.
For the cleaning of floors or carpets, insert the special floor brush tool (figure 9). For the cleaning of hard-
to-reach areas, such as the inside of cars, etc.., you must use the crevice tool, assembled as in (figure
10). The special dust brush for cleaning furniture, and carpets and upholstery inside cars, and useful for
the cleaning of small surfaces and angles is also included and must be assembled as in (figure 11). At
the end of the work turn off the machine by pushing the switches to the OFF position, disconnect the plug
from the source of electricity and clean the tank following the instructions in this booklet.
Warnings
GB
pag. 11