The adjacent image identifies the “WORK
PANEL” screen, the icon in the top right
corresponds to the charge level of the batteries.
The adjacent image shows the “SCRUBBING
AND DRYING” work screen for the BT - BTO
versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
both the brush head unit and the squeegee unit
are in contact with the ground. The working
program selected is the standard one.
The adjacent image shows the “SCRUBBING
AND DRYING with EXTRA PRESSURE” work
screen for the PM versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
both the brush head unit and the squeegee
unit are in contact with the ground. The extra
pressure is exerted on the brush head body.
The adjacent image shows the “SCRUBBING
AND DRYING IN ECO-MODE” work screen for
the BT - BTO versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
both the brush head unit and the squeegee unit
are in contact with the ground. The working
program selected is eco-mode.
The adjacent image shows the “SCRUBBING
AND DRYING IN ECO-MODE with EXTRA
PRESSURE” work screen for the PM versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
both the brush head unit and the squeegee
unit are in contact with the ground. The extra
pressure is exerted on the brush head body.
The adjacent image shows the “SCRUBBING
AND DRYING” work screen for the BTS
versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
both the brush head unit and the squeegee unit
are in contact with the ground. The working
program selected is the standard one.
The adjacent image shows the “SCRUBBING
AND DRYING IN ECO-MODE” work screen for
the BTS versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
both the brush head unit and the squeegee unit
are in contact with the ground. The working
program selected is eco-mode.
The adjacent image shows the “SCRUBBING
ONLY” work screen for the BT - BTO versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
only the brush head unit is in contact with the
ground. The squeegee unit is in its idle position.
The working program selected is the standard
one.
DISPLAY SCREENS (versions BT - BTS - BTO)
The adjacent image shows the “SCRUBBING
ONLY” work screen for the PM versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
only the brush head unit is in contact with the
ground. The squeegee unit is in its idle position.
The extra pressure is exerted on the brush head
body.
The adjacent image shows the “SCRUBBING
ONLY” work screen for the BTS versions.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
only the brush head unit is in contact with the
ground. The squeegee unit is in its idle position.
The working program selected is the standard
one.
The adjacent image shows the “DRYING ONLY”
work screen.
The symbol in the middle of the screen identifies
the type of work being carried out. In this case,
only the squeegee unit is in contact with the
ground. The brush head unit is in its idle
position. The working program selected is the
standard one.
The drying without scrubbing operation should only be carried out if
beforehand the device was used to carry out scrubbing without drying.
The adjacent image shows the “ECO-MODE
DRYING ONLY” work screen.
The symbol in the middle of the screen
identifies the type of work being carried out. In
this case, only the squeegee unit is in contact
with the ground. The brush head unit is in its
idle position. The working program selected is
eco-mode.
The drying without scrubbing operation should only be carried out if
beforehand the device was used to carry out scrubbing without drying.
The adjacent image shows the “CRITICAL
BATTERY CHARGE LEVEL” warning screen.
The symbol in the middle of the screen indicates
that the battery charge has reached a critical
level. The remaining charge is sufficient for
completing the drying task before recharging
the batteries.
The adjacent image indicates that “REVERSE”
movement is being used.
The symbol in the middle of the screen indicates
that reverse movement is currently being used.
The adjacent image indicates the “BRUSH
RELEASE” for the BT versions.
The symbol in the middle of the screen indicates
the activation of the sequence for releasing the
brush from the brush-holder plate on the brush
head.
14
