COMAC ABILA 42, Руководство пользователя, Страница: 21 / 22

41
CHOICE AND USE OF BRUSHES
POLYPROPYLENE BRUSH (PPL)
It is used on all floor types and offers good resistance to wear and to hot water (not over 60 ). PPL is not hygroscopic, then
preserves its characteristics even when working on wet floors.
NYLON BRUSH
It is used on all floor types and offers excellent resistance to wear and to hot water (60 and over). Nylon is hygroscopic and
tends, over a period of time, to loose its characteristics when working on wet floors.
TYNEX BRUSH
This brush bristles are impregnated with highly aggressive abrasives. This brush is use to clean very dirty floors. We recommend
using only the minimum necessary bare pressure to prevent damages to the floor.
STEEL BRUSHES
Bristles are made of steel wire or flat blades, or are mixed steel and synthetic fibres. The steel brush is used to remove scale from
badly uneven floors or floors with wide joints between tiles. Brushes with flat steel bristles (stiffer) are used to clean the toughest
scale.
BRISTLES THICKNESS
Thicker bristles are stiffer and should be used on smooth floors with narrow joints between tiles.
We recommend using softer bristles when floors are uneven or have deep joints or raised edges. Softer bristles penetrate easier
into joints.
Remember that when brush bristles are worn and become too short they become stiffer and are no longer able to penetrate in
depth. This is also because, as when using bristles that are too big, the brush tends to jump and skip.
PAD HOLDER
Pad holder is recommended for cleaning polished surfaces.
There are two types of pad holders:
1. Traditional pad holders with set of anchor stubs that retain and drive the abrasive disk during operation.
2. CENTER LOCK pad holders which, in addition to anchor stubs, also have a plastic snap-in centre lock system. This permits
perfect centring of the abrasive disk and ensures it is kept anchored without detaching. This type of pad holder is best for
machines with several brushes, where it is difficult to centre the abrasive disks.
LIST FOR THE CHOICE OF THE BRUSHES
Machine Brushes N Code Bristles type Bristles
∅ ∅ ∅ ∅
Brush
∅ ∅ ∅ ∅
Remarks
ABILA 42 2
66805020
66805050
66805060
66805120
66705020
PPL
PPL
PPL
TYNEX
Pad holder
0.3
0.5
0.9
1
210
210
210
210
200
ABILA 52 2
66808010
66808040
66808020
66808030
66708010
PPL
PPL
PPL
TYNEX
Pad holder
0.3
0.5
0.9
1
255
255
255
255
245