COMAC ABILA 42, Руководство пользователя, Страница: 18 / 22

38
DAILY MAINTENANCE
REAR SQUEEGEE RUBBERS REPLACEMENT
Check the squeegee rubbers wear and replace them if necessary.
Proceed as follows
1. Unthread the squeegee pipe from sleeve.
2. Remove the pin from column.
3. Remove the squeegee from its support.
4. Loosen the wing nuts (1) blocking the rubber blades and take them off.
5. Replace the rubbers
To reassemble the squeegee repeat the above-mentioned operations.
1
BRUSHES DISASSEMBLY
6. Push lever down to raise the base.
7. Turn key to OFF and remove it from the control panel (1)
WARNING!
Removing the brushes with power on may cause injury to the
hands.
1
8. Rotate the brush, with base raised, until it exits form the brush-bearing plate as
shown in the picture. The picture shows the direction of rotation for releasing the
right brush. Rotate in opposite direction for the left brush.
WARNING! Make sure that no persons or object are nearby the brush
during this operation.