COMAC ABILA 42, Руководство пользователя, Страница: 11 / 22

31
MACHINE PREPARATION
INSTALLING THE SPLASH-GUARD
The splashguard is supplied separately from the machine, for packing reasons, and is to
be installed as shown in the picture.
INSTALLING THE BRUSH
1.
Lift the brush base by acting on the pedal.
2.
Keeping the base lifted, thread the brushes on their seat on the hole under the base,
turning them until the three buttons enter the holes in the plate. Snap-shut the
button on the coupling spring to block it.
The picture shows the rotation direction just for the right brush: for the left one, turn
on the opposite direction.
We recommend to exchange daily the right brush with the left brush and vice versa. If
the brushes are not new, and their bristles are twisted, you would better reassemble
them in their original position, to avoid any overloads on the motor or excessive
vibrations.