FLOW 32 manual
Page 18 (total 18)
COMAC CAL s.r.o.
Servicing
All warranty and after-warranty repairs are carried out by the manufacturer, COMAC
CAL
s. r.o.
Unprofessional implementation of the operations described herein will void your warranty
claims for failures that may occur as a result!!!
Returning the meter to COMAC CAL s.r.o.
The meter you have was made with the maximum precision and it has been checked many
times and wet calibrated.
If the meter is used in agreement with this manual, the occurrence of faults is very rare.
Should they ever occur, contact our service department. If you return the meter to the
manufacturing plant, adhere to the conditions stated below:
-
Clear the meter of contaminations stuck to the sensor and measuring tube
(eventually to the Evaluation Unit).
-
If the meter was run with poisonous, etching, combustible liquids or with fluids
dangerous to water, check it and if appropriate, flush and neutralize the cavities
inside the sensor.
Please attach full description of the fault. COMAC CAL s.r.o. will not be able to process your
request promptly and correctly without this form.
