Page 5 of 10
INSTRUCTION MANUAL FOR LI-1100
LINE IMPEDANCE STABILIZATION NETWORK (LISN)
19121 El Toro Road, Silverado, California 92676
●
(949) 459-9600
●
com-power.com
REV121014
3. 0 Product Specifications
Model:
LI-1100
Electrical
Frequency Range:
150 kHz to 30 MHz
Compliant Standards:
CISPR 16-1-2, ANSI C63.4
Number of lines:
Two lines
Max current rating:
100 Amp AC, 70 Amp DC
Max Voltage Rating:
440VAC, 50/60 Hz (Line to Ground) / 620 VDC
Insertion Loss:
0.5 dB (150 kHz – 30 MHz)
Isolation:
>40 dB (150 kHz – 30 MHz)
Inductor type:
50 µH
Internal line termination:
Yes, 50 Ω
EUT & Power Connector:
100 Amps Shrouded Superior Electric sockets
RF measurement connector:
50Ω, N type (female)
Cooling:
Forced air
Power Adapter for fan:
Output: 12 VDC, 1 Amp
Input: 120 VAC, 60 Hz
Fuse:
1 Amp, 250 V
Adapter output connector Diameter:
2.1 x 5.5 mm Center Positive
Operating Temperature:
5° C to 40° C / 40° F to 104° F
Mechanical
Dimensions of each enclosure (L x W x H):
10 x 10 x 21 inches /25.4 x 25.4 x 53.3 cm
Combined weight of both LISNs:
17 lb. / 7.7 kg
This equipment is designed for indoor use only.
3.1
Other items available from Com-Power
SPA-series Spectrum Analyzers
LIN-115A, LISN 150 kHz – 30 MHz, 15 A
LI-215A, LISN 10 kHz – 30 MHz, 15 A
LI-125A, LISN 150 kHz – 30 MHz, 25 A
LI-550A, LISN 150 kHz – 30 MHz, 50 A
Special order LISNs with higher voltage and / or current
LIT-153 Transient Limiter
Cables and connectors
