10
Using Slave modes (SL1,SL2,SL3,SL4) to create a light show
Using 5 or more lights for best effect, VividPar HEX 6 can help create auto-light
shows by setting lights in order from Master, SL1, SL2, SL3, SL4 and engaging Auto
Programs on the Master fixture.
1. Set each of the desired slaves SL1, SL2, SL3, SL4:
◼
Go to SLNd in the main menu and press enter.
◼
Select SL1.
◼
Repeat steps for each slave fixture SL2, SL3, and SL4
2. Set the master:
◼
Go to SLNd in the main menu and press enter.
◼
Select NASt.
•
For best effect, have lights connected in sequence from Master, to SL1, to SL2, to
SL3, to SL4.
•
Accessing the (ShNd) programs on the Master light will now create varying displays
of synchronized light on the master and slave fixtures through (Auto) and (SoUn)
functions.
Troubleshooting
Problems
Solutions
No DMX Control
Ensure your DMX controller is sending signal and you are
using a proper and working DMX cable.
No response with IR
Remote
Engage and disengage Blackout as it may be active and
keeping the light dark
No response with IR
Remote
Ensure IR remote is enabled in Menu (rF) setting to
YES
