Colorjet VerveLED VLR 2513, Инструкция по установке и устранению неисправностей

Страница: 33 / 49

Page | 32 Verve LED
15. Checking Status
Before giving the nozzle test, user needs to provide the printing parameters like print origin (X and Y),
printing direction, and speed. To check the status of print head nozzles, click on the
Status option under
the Operation tab, as shown in the image below:
Fig 34: Checking the Status of Head Nozzles
The Media Thickness dialog box appears on the screen where user needs to set the media thickness, print
head to media height, and lifter height. After making the desirable changes, click on the Start Print button
to give the test print, as shown below:
Fig 35: Displaying the Media Thickness Dialog Box