Page | 29
VASTRAJET
•
Waste bin
•
Woven cotton bud sticks (for spreading the glue)
Glue Coating Procedure
Note
: Extreme care to be taken during the glue process, any negligence may render the coat unsuitable for
use, and complete process may be required to be repeated. 3 persons will be required for this process.
Follow these steps to start the glue coating process:
Step 1:
Put the Press Roller down.
Fig 25: Closing the Press Roller
Step 2:
Set the HMI to Glue Cycle mode, set the belt speed as 7 (Ensure that belt direction is reverse, and
washing tub should be down).
Fig 26: Enabling the Glue Cycle Mode
