Page
14
of
73
VastraJet K2
LOADING THE FABRIC
Steps to load the fabric:
Step 1:
Run the
Supply Motor
in the manual.
Step 2:
Stop the
Supply Motor
when the unlock position of
Safety Chuk
and
Shaft
get matched, as shown below:
Fig 14: Displaying the Unlock Position
Step 3:
Push the
Safety Chuk
to remove the shaft.
Step 4:
Insert the shaft into the fabric roll.
Step 5:
After inserting the fabric roll, fill air into the shaft to fix the roll with shaft, as shown below:
Fig 15: Filling Air
Shaft
Air Filling
Safety Chuk
Unlock Position
Safety Chuk
