Page | 6
TXF
Warnings and Cautions for Use
Warning
Do not use the machine in unfavorable conditions.
It may cause an electric shock and fire. Thus, turn the power OFF and unplug switch while not
in use. If again find any problem, directly contact to the dealer and never try to repair the
machine by yourself.
Do not disassemble parts, repair or modify the product unless it is instructed in this
documentation.
It may cause an injury, electric shock, and fire. Thus, ColorJet is not serving any responsibility
for any injury or damage that can result of uninstructed dis-assemblies, repairs and
modifications.
Do not use unspecified power supply.
Using an unspecified power supply, it may cause in an electric shock and fire.
Do not plug/unplug the socket with wet hands.
It may cause an electric shock.
Do not use the damaged power cable.
It may cause an electric shock and fire.
Do not do any of the following:
•
Modifying the power cable
•
Placing heavy objects on the power cable
•
Forcibly twisting, bending or pulling the cable
•
Wiring near a heater or a device that generates heat
If again find any problem, contact to your dealer.
Do not insert many plugs in the outlet used for the machine.
It may generate heat, causing a fire.
Handle the power plug with care.
Improper handling of the power plug may cause a fire.
Following must be observed:
•
Remove dust and debris from the plug before putting it into the outlet
•
Do not put the power switch at wet place
Do not insert or drop metal or flammable objects into the vent or other openings.
It may cause an electric shock and fire.
Do not use the product, if foreign objects or liquids are inside.
It may cause an electric shock and fire. Thus, turn the power OFF and unplug power switch
while machine not in use. If again find any problem, contact to your dealer.
Do not use the power cable other than the one that came with the product.
It may cause an electric shock and fire.
Make sure that properly earthing is provided for the machine.
Using the machine without proper earthing, it may cause an electric shock and fire. If an triplex
outlet is not available, attach the earth cable to the following options to avoid an electric shock
and fire situations:
•
An earth terminal on the outlet
•
An object, such as a metal fragment, which is buried lower than 650mm under the
ground.
•
A terminal provided by D-class* earthing
