Page
4
of
47
NEPTUNE HQ
Supporting Software
Table 2: List of Supporting Software
Parts
Software
Operation system
Windows 7/10
Driver of print card
Provide by ColorJet CD
Operating Software of printer
Provide by ColorJet CD
Site Requirements
The site requirements are given as below:
•
Dimension of printer:
LxWxH 4500 x 1000 x 1400 MM
•
Minimum working area requirement:
LxWxH 5500 x 2500 x 3000 MM
•
Avoid using carpet on floor as it can generate electrostatic charge and can accumulate dust.
•
There should be ample space to load and unload the media as well as ink.
•
The machine should be installed in a room which is air conditioned and is dust free and adequate
ventilation is available in the room. It is also important that adequate space should be available
around the machine for easy operation and maintenance.
Power Requirements
The machine needs the following power connections.
•
Uninterrupted Power supply of 220V (+ / - 10% ), 50Hz (+ / - 2 % )
•
The power requirement will be as follows:
Machine
700W
PC
500 W
Heater Pre
1000 W
Heater Post
1000 W
It is recommended that 5 KW UPS be installed for the machine, alternatively one may go in for a 2 KW
UPS and let the Heaters run on RAW 220 Volts
