Page
59
of
62
Metro (Konica Head)
•
Coating of fabric is not correct
•
Fabric supporting bar and Take Up roller is stained with ink
Ink Not Filling
•
Main tank is empty
•
Ink pipe is having cut/bend
•
Ink pump is not working/connector loose/open
•
Sub tank float connector is loosely connected to the headboard
•
Sub tank float is not working
Fabric Not Peeling OFF
•
Takeup Motor power is not ON
•
Dancing bar weight is less
•
Core is slipping and not intact with air shaft
•
Fabric is not sticked to the core
Impression of ink on plain fabric
•
Belt is not washed properly
•
Water in the tank is dirty and have fabric lints
•
Fabric threads are sticked over the belt
•
Brush is congested with fabric threads and not uprooting the threads from the belt
Printer Manager Not Showing “Ready”
•
USB is disconnected from computer or loosely connected
•
Print engine is OFF
•
Main board is faulty
•
USB cable is faulty
Print Stops in Between Printing
•
USB cable is loose / faulty
•
Image files are heavy in size
•
Ground wire is disconnected
•
Encoder scale is having ink stains/scratches
•
Ripped file is having error
Print is Shifting wrt Fabric/ Junk Printing
•
Encoder scale is having ink stains (print shows vertical color bands)
•
Encoder sensor is not clean
•
Fiber optical cable is faulty
Print is Blur
•
No proper calibration viz. bi-direction and step
•
Head height is disturbed and not calibrated for above
•
Incorrect resolution is selected
•
X div is selected "High Speed" instead of "High Precision"
