Page
44
of
62
Metro (Konica Head)
Similarly, you can click on any other option and its related options get enabled in the right pane of the
Edit Job form.
Ripping and Printing
Ripping is an independent process which converts a raw image file into the machine-readable format and
get the file ready for printing. The Rip software supports the tiff, jpeg, eps, psd, bmp file formats. After
ripping the image file, the output file will be in
“.prt”
or
“.prn”
file format. Thus, you should first rip the
image file before printing and then issue the Print command. While ripping, the color profiles are used to
automatically perform the color corrections in the image.
You can print an image on the selected media simply by clicking on the
Print Job
button available on the
Quick Access Toolbar,
as shown below:
Fig 59: Issuing the Print Job Command
‘Printer Manager’ is the operating software for this printer which will be bundled with machin
e. For
printing, there are two ways:
•
If ‘Print to file’ is selected in the Rip Software, ripped files will be stored in the particular folder
which has to be selected by clicking ‘Add Job’ in Printer Manager by locating the path. ‘Use file
setting’ has b
e disabled in this case.
Fig 60: Selecting the Use File Setting
•
Printing command can be given directly from Rip software, if the Rip software supports printer
driver to simultaneously rip and print. ‘Use file setting’ has be
enabled from the Printer Manager
software.
