Page
36
of
62
Metro (Konica Head)
Print Head Calibration
The Print Head calibration is categorized into the following types:
•
Mechanical Check
: Includes Vertical Check and Angle Check
•
Software Calibration
: Includes Horizontal Calibration and Step Calibration
Let’s discuss the above
-mentioned checks and calibration one by one in details.
Note:
Mechanical checks are performed by service engineer, thus these checks and their description are
not included in user manual.
Opening the Calibrating Wizard
Print Heads should be calibrated to ensure good printing quality. To open the Calibration Wizard,
click
on
the
Main Menu
Tools
Calibration Wizard
path, as shown below:
Fig 45: Selecting the Calibration Wizard Option
This should bring up the calibration wizard which is shown below:
Fig 46: Displaying the Calibration Wizard
