Page
14
of
62
Metro (Konica Head)
Loading the Fabric
Follow these steps to load the fabric:
Step 1:
Run the
Supply Motor
in the manual.
Step 2:
Stop the Supply Motor when the unlock position of Safety Chuk and Shaft get matched, as
shown below:
Fig 9: Displaying the Unlock Position
Step 3:
Push the Safety Chuk to remove the shaft.
Step 4:
Insert the shaft into the fabric roll.
Step 5:
After inserting the fabric roll, fill air into the shaft to fix the roll with shaft, as shown below:
Fig 10: Filling Air
Unlock Position
Unlock Position
Air Filling
