2
Slim Pace Clocks
Physical Installation
Determine the location for your pace clock. It is your responsibility to choose a location
where the wall composition or mounting structure can support the weight of the slim pace
clock. Use appropriate mounting hardware for the weight of the clock and its
environment. The keyhole slots in the back of the clock are .359 inches at the bottom to
accommodate the head of the screw, and .172 inches at the top, to accommodate the
shank of the screw. Installation must meet all national and local codes. The 6-digit slim
pace clock is pictured below.
Model Weight
Distance between keyhole slots
6-digit 28 pounds (12.7 Kg) 48 inches
4-digit 20 pounds (9 Kg)
36.75 inches
Electrical Installation
Connect to standard outlet (120V or 230V) no further than 6 feet from left end of clock
with the supplied power cord. The pace clock is grounded through the power connection.
For outdoor installation, the clock can only be used with an outdoor rated receptacle.
Operating Instructions
Synchronizing clocks
To set multiple clocks to the same time, they must be set to the same channel and PAN
(see
Setting Channel and PAN
, page 1).
Turn on all of the clocks. They will synchronize with each other within two minutes.
To change their time
, turn all of the clocks on, and set one as described below. As soon
as time is changed on that clock and you have exited the menu, it will send the selected
settings to the other clocks.