Colorado time systems GEN7 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 56

Colorado time systems GEN7 Скачать руководство пользователя страница 55

58

[email protected]

+1 970-667-1000

Gen7 Zeitmeßgerät für Vorgänger Systeme

Umgebung

Temperatur: 0°C - 45°C
Luftfeuchtigkeit: 90% (nicht kondensierend)
Höhe: 0 bis 3000 m

Elektrische Daten

Nur mit Klasse 2 DC Stromversorgungs-Modellen R-920-056, R-920-056, R-920-057 oder R-920-058 (12

VDC @ 7.5A), passend für die korrekten Steckdosen Ihres Landes zu verwenden

Batterie: Nickelmetallhydrid, wiederaufladbar, 7,2V, 10.000 mAh
Betriebsdauer batteriebetrieben: bis zu 6 Stunden normalen Gebrauches

Eingänge und Ausgänge (von links oben nach rechts unten)

Anzeigetafelausgang RS-232, ±12V, 60mA max
Anzeigetafelausgang

: RS-485, differenzielle Leitungen, 3V, 300 mA max. 12V, 2,5A

Stromversorgung, kurzschlussgeschützt.
Anzeigetafelausgang

:RS-485, differenzielle Leitungen, 3V, 300 mA max. 12V, 2,5A

Stromversorgung, kurzschlussgeschützt.
USB B zu PC (CTS Expansionsport): Bidirektional, versorgt vom PC
USB B zu Wettkampf Management PC: Bidirektional, versorgt vom PC
USB A: Bidirektional, versorgt vom Zeitmeßgerät
Ethernet Verbindung: 1GBit max, isoliert
Start Eingang: 3.3V @1,7mA
Zeitmeßeingänge: Primär/Backup/Wendeseite: 98 Eingänge in 8 Steckverbindungen, jeder 3,6V @ 1,8
mA
Stromversorgungseingang: 12V, 7A max. Versorgt das Gerät und lädt die Batterie, nur mit Klasse 2
Gleichstromstromversorgungs Modell R-920-056, R-920-057 or R-920-058 (12 VDC @ 7,5A) zu
verwenden

Bestimmungsgemaesser Gebrauch

Dieses Produkt ist für die Benutzung in Swimming Pools für innen und außen bestimmt. Die Installation
und Verwendung des Gen7 Zeitmeßgerätes muß gemäß den landesüblichen Vorschriften erfolgen. Das
Gen7 Zeitmeßgerätes sollte in einer sicheren Entfernung vom Pool verwendet werden damit es nicht
angespritzt wird. Wenn das Gerät im Kalten gelagert war muss es vor Verwendung auf
Raumtemperatur gebracht werden um Kondensation zu vermeiden.

Installation/Wartung

Wenn das Gen7 Zeitmeßgerät nicht so installiert und verwendet wird wie von CTS spezifiziert, können die

Funktion und die Schutzvorrichtungen beeinträchtigt werden. Es gibt keine weiteren notwendigen

Service-Wartungsarbeiten für das Gen7 Zeitmeßgerät als die routinemäßigen Reinigungsarbeiten wie sie

im Handbuch beschrieben werden. Versuchen Sie nicht, das Gerät zu öffnen. Wenn die Aufkleber die die

Geräteschrauben abdecken entfernt oder verletzt werden, erlischt die Garantie.

«
...
53
54
55
56
»

Содержание GEN7

























































Отзывы:

Нет отзывов