Colorado time systems Dolphin, Руководство пользователя

Страница: 8 / 24

4
Hardware Set Up
Setting up the Base
1. Connect base unit to computer with a standard USB cable
(included with the Dolphin system).
2. Open the Dolphin interface, and set the channel on the base:
- Click the Channel box in the lower left corner of the screen
- Select the desired channel
Setting up the Starter
There are three ways to use Dolphin to start timing a race. Choose the method your facility
will be using and follow the instructions below. The Starter has a small cylindrical BNC
connector on top (see picture below).
Method 1: Wireless Manual Start/Stop
Wireless Manual Start/Stop means that the Dolphin wireless stopwatches are used strictly
like standard stopwatches: each Lane Timer uses the Dolphin watch to start, stop and reset
individually. The data is transmitted wirelessly to the base, and stored on the laptop for
access by your meet management software. This method meets all ruling bodies’ (FINA,
NCAA, USS, NFHS, YMCA) requirements for backup timing.
To set up for this method, put the Dolphin Starter back in the case. It is not used for wireless
manual start/stop. Go on to Setting up the Stopwatches beginning on page 6.