3.4 Adjustment of the mechanical label scanner
The mechanical label scanner (not used on magnetic flap adapter) is an alternative to the opti-
cal label scanner and is mainly used for transparent labels.
1.
Scanner support
2.
Scanning head
3.
Nut
Figure 10
Adjustment:
Place the label under the scanning head, the LED on the scanner support must be turned
on. If this is not the case, unscrew the nut on the scanning head and turn it counterclock-
wise until the LED turns on.
Turn the scanning head clockwise until the LED turns off.
Turn the scanner one quarter turn forward and retight the nut.
Place the gap between the labels under scanning head, the LED-display must be turned
on.
Note:
No adjustment is necessary on the traction unit!
2 - 6 mm
LED
1
2
3
1
2
3
5999.515-01E 12.06.2007 WM
Page 13 / 47
