16'x13' WHITE PINE
™
with SCREEN ROOM
1
Layout & Positioning of Tent
– Layout and position tent with screen room
facing desired direction. (illus. 1)
– Stake down tent corners. Do not stretch
too tight. Angle the stakes slightly toward
the tent. (illus. 2) Keep the floor taut.
– Stake down the remainder of the
stake loops and unzip doors.
– Assemble main tent poles (black)
and side tent poles (gray) by interlocking
the shock-corded sections.
– Insert the main tent poles (black) diagonally
through the pole sleeves. This will form an
“X” in the center of the tent. (illus. 1)
– Insert side tent poles (gray) through the pole
sleeves at the ends of the tent. (illus 1)
When You Are Ready
To Set Up Your Tent
– Select a level campsite clear
of rocks, branches and other
hard or sharp objects.
– Do not set up your tent
under trees.
– For best results in windy
conditions, position the end
of tent into the wind.
(2) Main Tent Poles
Part No. 9271A166
(2) Side Tent Poles
Part No. 9271A167
(1) Screen Room Ridge Pole
Part No. 9271A169
(2) Screen Room Upright Poles
Part No. 9271A168
Rainfly Part No. 9271A164
(1) Rainfly Pole
Part No. 9271A165
Instructions apply to Part Number 9271A163
Illus. 2
Stake loops
properly staked
Front of
Screen Door
Main poles through pole sleeves
Illus. 1
POLE ASSEMBLY PARTS
Connect Frame to Tent
– Insert one end of main tent pole end onto pin of pin &
ring system, nearest the middle of the tent. (illus. 3, 4)
– Go to opposite end of pole and gradually apply
pressure to the pole forming an arch until you are
able to insert the pin into the pole. (illus. 3, 4)
– Repeat for second pole.
– Insert one end of side tent pole end onto pin of
pin & ring system, at the corner of the tent. (illus. 3)
– Go to opposite end of pole and gradually apply
pressure to the pole forming an arch until you
are able to insert the pin into the pole.
– Repeat for second pole.
– Attach frame clips on the tent tent to frame poles.
(illus. 3 & 5)
2
illus. 5
Frame clips
illus. 3 Tent shown with
main and side tent poles
in place.
illus. 4
Pin & ring system located
on the front & rear of tent
Side tent
pole
