Coleman 011-2044-8, Руководство пользователя

Страница: 12 / 40

• Wipe any excess dirt build-up from the blades.
• Check all electrical connections to make sure they are tight and free from corrosion.
• Check the voltage of your battery bank with a Multi-meter and clean the terminals
.
• Sunforce Products suggests replacing the blades every five years for optimal
performance.
Trouble shooting
Caution: You may require an extra person to assist with these tests.
1) Remove the blade/hub from the turbine. Replace the rotor hub nut on the rotor shaft.
2) Quickly spin the rotor shaft manually with your fingers while connecting and
disconnecting the red and black wires (turbine must not be connected to batteries).
3) With the red and black wires connected to each other, the shaft should be more difficult
to turn. When the wires are disconnected it should spin freely.
Should this not be true please contact supplier or Sunforce Products.
4) With your Sunforce Wind Turbine connected to your battery bank, use an electric hand
drill to spin the rotor shaft.
5) Below 500 RPM, the rotor should spin freely without friction.
6) At 500 RPM and above, the Wind Turbine should be charging the battery. You should
feel resistance on the rotor shaft if the shaft is not
rotating; contact your turbine dealer or
Sunforce Products. Be aware your battery banks needs to be under fully charged as the
Turbine needs to read a charge.
Warranty
Sunforce Products warrants your product to be free from defects in material and/or
workmanship for a period of 3 years from original date of purchase. Warranty coverage is
extended only to customer (original purchaser). If product proves defective during warranty
period, Sunforce Products, at its option will
1. Replace wind turbine with new or refurbished product
2. Correct reported problem
Customers warranty continues to be valid on repaired or replaced product from original
warranty date.
Restrictions
This warranty covers defects in manufacturing discovered while using the product as
recommended by the manufacturer. The warranty does not apply to a) equipments,
materials, or supplies not manufactured by Sunforce Products. b) Product that has been
modified or altered other than by Sunforce Products or without prior Sunforce Products
approval. c) Has been exposed to winds exceeding 157mph d) Windstorms, lightning and
Hail damage e) Repairs performed by other than authorized Sunforce Products support
staff. f) All acts of God; misuse, negligence or accidents. g) Tower foundation and wire h)
has not been installed, operated, repaired or maintained in accordance with the
instructions supplied by manufacturer. Any service identified in the above list or product is
found not to have any defect in manufacturers’ workmanship or materials the customer will
be responsible for the costs of all repairs and expenses incurred by Sunforce Products.
DISCLAIMER
EXCEPT FOR THE EXPRESSED WARRANTY SET FORTH ABOVE, THE
MANUFACTURER DISCLAIMS ALL OTHER EXPRESSED AND IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OR FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY AND NON-INFRINGEMENT. NO
OTHER WARRANTY, EXPRESSED OR IMPLIED, WHETHER OR NOT SIMILAR IN