Please do not remove the pre-existing thermometer and probes until the new
thermometer is confirmed to be functioning properly.
TraceableLIVE® BASIC SET UP INSTRUCTIONS
DEVICE SET UP
1. PROBE CONNECTION: Connect “P1” probe
into “P1” slot and “P2” into “P2” slot on the
top of device (serial numbers on the probes
must match the serial number on the unit)
2. BATTERY ACTIVATION: Remove the 2
plastic slips from the battery
compartment to activate the batteries.
3. VIEW THE TEMPERATURE FOR THE
APPROPRIATE PROBE CHANNEL: Press Channel
Select to display the desired channel, or
dual channels.
4. SELECTING THE UNIT OF TEMPERATURE
MEASURE: Press to select the desired unit
of
temperature measure (°C or °F)
.
