Cole Parmer 52412-15 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 73

Cole Parmer 52412-15 Скачать руководство пользователя страница 30

52412Mechnicaloven_ver_1.2

30

3.3

The labels attached to the instrument

1) ID label

An ID label of the basic information is attached on the panel of the right side of the instrument. Before

using it, please check the voltage, phase, and capacity of the power indicated on the ID label.

2) Safety label

Safety labels are attached to the instrument to provide important information about potential risks or

how to avoid them. For safe operation, all users must check the safety label before using it and read

the 1.4 Instructions for Safe Use (required reading) carefully to understand the relevant safety guidelines.

If the safety label is damaged, please ask the Cole-Parmer branch or seller for a new label.

3) Custom Logical Safety (CLS)-Control System Label

It is a label that certifies that the CLS-Control system, the highest safety level control device, is
applied. [2.2.2 Refer to Safety Enhancement]

Safety Label

CLS-Control system Label

«
...
28
29
30
31
32
...
»

Содержание 52412-15










































































Отзывы:

Нет отзывов